One. Preheat program: raw materials needed for the production of cutlery box by weight, said material, said good warm-up into the high-profile wave uniform, so that the powdered raw blocks.

 
II. Plain procedure: a good warm-up caked material poured into the mold, start machine plain program, through high temperature and pressure, curing.

 

three. Decals procedure: brushed varnish pink paper flower by flower-shaped cut is good, according to the requirements attached to the plain molded tableware, flower paper to stick positive, moderate decals orientation, people look beautiful, posted a good start to spend mechanical printing program.

 

IV. Plus gold program: product paste after good flower, the product surface evenly sprinkle light pink, light pink can not spread less, or affect the color of the product, of course, can not spread much. Then start the machine, at high temperature and pressure mechanically, cured product surface glossy porcelain general.

 

Fives. Polishing program: After the product produced but also for grinding, polishing, because the products produced there are flash, is not conducive to the use of people's lives, and easy for people's hands and mouth causing injury; therefore grinding, polishing necessary, by grinding, burr polishing can remove the product, make the product look more beautiful, more smooth lip.

 

VI. Inspection, packaging procedures: products through the grinding, polishing operations, entered the testing links, in order to ensure product quality, strict customs inspection, initial inspection and re-inspection shall be provided, pick out substandard products, then into the library packaging